top of page
Dover Latte.jpg
Dover Latte.jpg
Dalton Natural

Dalton’s rich stain choices allow hints of the wood graining and color to show through and works beautifully on its own or pairs well with other styles to complement any kitchen design. (If you’re looking for a painted shaker door, check out our Cambridge door.)

FACE FRAMES: Constructed from 3/4” hardwoods.  Base and wall frames have 1 1/2” stiles and rails.  Base cabinets have a 1” reveal at the top.  Bottom and sides have 1/4” reveal.

DOORS: Premium full overlay door styles with soft-close door hinges.  Stained doors are solid hardwood and painted doors are MDF. 

PANELS: Constructed from 1/2” plywood with option for finished ends.  Ends, tops and bottoms are captured in frame grooves.  Backs are captured in end panel grooves. 

SHELVES (not shown): Constructed from 3/4” plywood and finished on both sides.  Base shelves are half-depth adjustable at 2 1/2” increments.  All secured for shipment with locking shelf clips utilizing 1/4” diameter dowel.

HINGES: 6-way fully concealed 108° self-closing cup hinges that allow easy height, width, and depth adjustment are standard.

CABINET INTERIOR: Sealed with clear-coat finish.  Finished Interior option may be selected on wall, base and tall cabinets up to 24” deep.

BACKS: For ease of installation, the backs are solid 1/2” plywood.  Base cabinet backs extend to the floor providing optional structural stability.

DRAWERS: EuroBoxes are 5/8” thick hardwood plywood with dowel construction.  Option to upgrade to dovetail construction.  Both options are clear coated and bottoms are fully captured plywood.  Glides are under mount, full extension soft-close

TOE KICKS: Constructed from 1/2” unfinished plywood.  They are inset into the cabinet box 3 1/2” and are 4 1/2” high.  Toe Kick Material (TKS) is required to finish the toe kick space.

ROLL OUT TRAY & PILASTER KIT (optional): EuroBox (standard) or dovetail upgrade option for roll out tray box with undermount glides.  Pilasters are installed at each corner of base cabinet (pantries get 2 sets of pilaster kits) with slots for approximate 1” height adjustments.

I-BEAM STRETCHERS: All base cabinets have a 3/8" x 3" beam stretcher on the top left and right sides. The stretchers are captured by grooves in the frame, end panels, and back panel to provide reinforcement to the base cabinet construction.

Related Matching Door Styles
Previous
Next

Dalton’s rich stain choices allow hints of the wood graining and color to show through and works beautifully on its own or pairs well with other styles to complement any kitchen design. (If you’re looking for a painted shaker door, check out our Cambridge door.)

bottom of page